Table of Contents
Advertisement
Handling Paper
2-46
MFF in Manual Feed Mode
To use the MFF in manual feed mode, first select
using the tray select mode of the control panel. Next, start your
software program to print a file. Paper handling is similar to that of
the multi-function feeder. The following shows paper loading step
only:
If your file has additional pages, the printer prompts you for another
sheet.
Setting Up the Rear Stacker
This printer has a rear stacker that allows you to eject sheets straight
out the back to minimize curl. Use the rear stacker to print thick
paper, envelopes, overhead transparencies, and labels.
To use the rear stacker, follow these steps:
MANUALFEED ON
Place a sheet with print
side face up. When the
printer is ready to print, it
displays the message
Insert size
to prompt
you to prepare a sheet of
paper. Insert the sheet until
it is stopped. Insufficient
insertion prevents paper
from being fed or causes
skewed feeding.
1. Open the rear stacker. Pull
the projections at the top of
the stacker.
2. Extend the subguide. Raise
the top of the subguide to
open it.
User's Manual
Advertisement
Table of Contents
