Setting Up The Rear Stacker - Fujitsu 10 ppm User Manual

10/14 ppm page printer
Table of Contents

Advertisement

Handling Paper
3-28
Release the paper once it begins to feed automatically. If your file has
additional pages, the printer prompts you for another sheet.

Setting Up the Rear Stacker

This printer has a rear stacker that allows you to eject sheets straight out
the back to minimize curl. Use the rear stacker to print envelopes,
overhead transparencies, and labels.
To use the rear stacker, follow these steps:
1. Open the rear stacker. Pull
the projections at the top of
the stacker.
2. Remove the paper support
from inside the stacker.
Paper support
3. Set the paper support in
position. Insert the two ends
of the paper support into the
mounting grooves of the rear
stacker.
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

14 ppmPrintpartner 10vPrintpartner 14v

Table of Contents