Table of Contents
Advertisement
Action-required
Status
Indications
User's Manual
These conditions, not errors, require you to take action. The
following table lists the message indications, explains causes, and
suggests solutions.
Message
INSERT size
********
LOW TRAY x,y
READY
REPLACE PARTS
Important:
If the upper door is not firmly closed, the printer does not work.
Upper door
Action-required Status Indications
Causes and solutions
Cause: Printer is ready for manual
insertion of paper.
Solution: Put paper into manual feeder.
Cause: Tray x and/or y is near end of
paper. This message flashes in the lower
row with the current message alternately
displayed in the upper row or both rows.
1: Tray 1; 2: Tray 2; 1, 2: Trays 1 and 2
Solution: Prepare paper.
Cause: Developer unit or drum unit is
near end.
Solutions: Replace the developer unit or
drum unit.
Note: When the upper door is closed after
replacement, the printer enters menu
mode. Be sure to press
Clear Warning.
SOLVING
PROBLEMS
to perform
ENTER
5-21
Advertisement
Table of Contents
