Action-Required Status Indications - Fujitsu 10 ppm User Manual

Action-required Status Indications

Action-required
Status
Indications
6-14
These conditions, not errors, require you to take action. The following
table lists the message indications, explains causes, and suggests solutions.
Message
INSERT size
READY TONER LOW
READY REPLACE PARTS
Important:
If the upper door is not firmly closed or the paper guide is not in the
locked position, the printer does not work.
Upper door
Causes and solutions
Cause: Printer is ready for paper.
Solution: Put paper into manual feed slot.
Cause: Toner runs short.
Solution: Prepare new toner bottle.
Cause: Print unit is near end.
Solutions: Replace print unit.
Note: Enter menu mode and select Clear
Warning. After replacement, be sure to
press to perform Clear Warning.
ENTER
Rear stacker
Paper guide
User's Manual