Installing Cylinder Head - Panterra Fusion Service Manual

84
7. Cylinder Head Valve
4. Use valve spring compressor
accessory to make valve contact with
valve collar. Use plastic mallet two or
three times softly on the ends of the valve
to seat collars.
When using mallet, be careful to
not damage valves.

Installing Cylinder Head

1. Install locating pin and gasket.
2. Install cam chain adjuster plate.
3. Slide cylinder head over studs and
into place.
CAMSHAFT
CHAIN GUIDE BAR
2
CYLINDER HEAD
GASKET
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
3
CYLINDER HEAD
LOCATING PIN
7-14
3
SPRING
VALVE
COMPRESSOR
CHAPTER 7: CYLINDER HEAD VALVE