118
11. The Crankcase and the Crankshaft
Dismantling the
Crankcase
1. Detach the bolt of the
chain adjusting guide lever
of the cam and remove the
lever.
2. Remove assembly
bolts of the crankcase.
3. Dismantle the right and
left crankcases.
3
Attention:
Don't damage the
gasket surface.
When separating
the crankcases,
don't use a
screwdriver to
pry them apart.
4. Remove the gasket and
the locating pin.
5. Remove the crankshaft
from the crankcase.
RETAINING SCREW
OF THE CHAIN
GUIDE LEVER
LOCATING PIN
4
LOCATING PIN
CRANKSHAFT
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
1
5
GASKET
11-3
CHAPTER 11: THE CRANKCASE AND THE CRANKSHAFT
4
3