Removing The Steering Handlebars; Assembling The Steering Handlebars - Panterra Fusion Service Manual

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
12. The Front Wheel, Front Brake,
Front Buffer and the Front Fork
Removing the Steering
Handlebars
1. Detach the front and rear
covers of the handlebars.
2. Remove the two bolts of
the left brake lever.
3. Remove the bolts of the
right hydraulic brake drum.
These parts may be one
assembly.
4. Remove the two bolts of
the throttle control and
remove the throttle grip and
the cable. Finally, remove the
throttle grip from the handle.
5. Remove the handlebar
clamp bolts.
Assembling the Steering
Handlebars
1. Align the lug of the
handlebar clamp to the
groove of the steering lever,
then install and tighten the
bolt.
Torque: 4.0-5.0 kg/m
28-35ft lbs
CHAPTER 12: THE FRONT WHEEL, FRONT BRAKE,
FRONT BUFFER AND THE FRONT FORK
LEFT HANDLEBAR
2
BOLT
4
12-4
RIGHT HANDLEBAR
3
BOLT
1a
127
1b