58
5. Fuel System
Vacuum Chamber-Break down
1. Remove two screws and take off
cover.
2. Remove spring, diaphragm piston.
3. Remove fuel pin and slide.
Take special care not to
damage diaphragm. Replace
if damaged.
Checking
1. Check pin for wear and replace if
necessary.
Assembling
1. Install piston or plate to body of
carburetor.
2. Push the button of the piston to
vacuum chamber side and keep open
completely. Install spring and cover.
3. Install screw.
Be sure to hold slide and
piston in up position when
installing cover and tighten
screw.
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
1
COVER
2
SPRING
3
FUEL PIN
DIAPHRAGM
PISTON
2
5-7
CHAPTER 5: FUEL SYSTEM