Checking The Driving Pulley - Panterra Fusion Service Manual

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
9. Driving Belt Device & The Starting Lever
6. Remove the retainer.
7. Remove the rollers.

Checking the driving pulley

1. Check the wear of the rollers.
Measure the OD of the roller.
Maximum service allowance.
Replace when it is below 12.4mm
(.47 in.).
2. Check the wear of the driving pulley
sleeve. Measure the OD of the moving
section of the sleeve.
Maximum service allowance:
Replace when it is below 33.94mm
(1.37 in.).
CHAPTER 9: DRIVING BELT DEVICE & THE STARTING LEVER
ROLLER
9-8
7
RETAINER
2
DRIVING PULLEY
SLEEVE
103