Disassembly Of Carburetor; Checking Auto-Choke - Panterra Fusion Service Manual

55
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
5. Fuel System

Disassembly of carburetor

3
1. Remove seat and helmet
storage tub.
2. Remove right side body panel.
3. Disconnect cable connector for
auto choke.
4. Loosen carburetor drain screw
and drain fuel from float bowl.
CARBURETOR DRAIN
SCREW LOCATED
5. Loosen clumps in intake tube
UNDERNEATH FLOAT BOWL
and main fold.
4
6. Loosen throttle cable and
remove from support and from
throttle control plate.
7. Remove fuel line from
carburetor.
AUTO CHOKE
9
8. Remove air inlet tube from
carburetor and pull carburetor
straight back out of intake manifold.
9. Remove auto choke from
carburetor.
FUEL LINE
7
Checking Auto Choke
1. Check resistance volume.
AIR INLET TUBE
8
2. Standard value below 5 when
cold.
3. Connect auto choke to 12V
THROTTLE SCREW
battery.
6
4. Plunger should extend 3/8 inch
in 5 minutes.
AIR SCREW
THROTTLE CABLE
5-4
CHAPTER 5: FUEL SYSTEM