Panterra Fusion Service Manual page 168

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
15. Ignition System
Magneto Pickup Coil Inspection
This test is to be conducted with
the stator mounted in the engine.
1. Remove the fan cover.
2. Disconnect the magneto.
3. Test the pickup coil resistance between
the blue/yellow and green lead terminals
whose standard value is 80-160.
4. Dismounting the magnetor (refer to
14-6).
Charging Coil Inspection
1. Test the charging coil resistance
between the black/red and the green lead
terminals whose standard value is 500-600 .
Spark Advance Angle Inspection
Since CDI is used, there is no need
to adjust the timing advance.
If the spark advance is abnormal,
inspect CDI, pickup coil or magneto.
Replace if necessary.
3. Remove timing lid.
4. After the engine is warmed up, check
the spark advance angle by the spark timing
lamp. It is proper for "F" to align with + 2˚
with the engine revolving at a speed of
1700rpm.
The spark advance angle should be 13˚ +
1˚ (2000r/min).
CHAPTER 15: IGNITION SYSTEM
2
15-6
1
FAN COVER
MAGNETO
165