Assembling The Upper Race - Panterra Fusion Service Manual

136
12. The Front Wheel, Front Brake,
Front Buffer and the Front Fork
2. Press in the new race.
Attention:
Be sure to press the race all the way
into place.

Assembling the Upper Race

1. Coat the race with grease and set the
race into the sleuth. Then coat the race with
grease.
2. Install the front fork.
3. Coat the top race with grease and set it
in place.
4. After tightening the top race, turn it back
and forth several times to make the bearing
set into place.
5. Install the top race, and then tighten
the upper nut.
Torque: 8.0-12.0kg/m 50-60ft lbs
6. Attach the front wheel (refer to 12-7).
7. Attach the handle (refer to 12-3).
8. Attach the cables (refer to 1-15).
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
2
RACE
12-13
CHAPTER 12: THE FRONT WHEEL, FRONT BRAKE,
RACE
RACE
1
FRONT BUFFER AND THE FRONT FORK