Assembling The Left Crankcase Cover - Panterra Fusion Service Manual

100
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
9. Driving Belt Device & The Starting Lever
2. As shown in the
picture on the right,
assemble the driven
gear and the friction
spring. Maintain the
orientation as shown.
2
3. Install the starter
pivot (3a). Install the
washer, then the
retainer (3b).
3b
Assembling the
Left Crankcase
Cover
WASHER
1. First, install the
locating pin, then the
gasket.
2. Assemble the left
crankcase cover, and
3a
then tighten the eight
fix bolts diagonally.
STARTING LEVER
Install the air tube
together, and then
install the retainer.
1
2
GASKET
LEFT CRANK COVER
9-5
CHAPTER 9: DRIVING BELT DEVICE & THE STARTING LEVER