Panterra Fusion Service Manual page 73

70
6. Engine Removal and Installation
Engine Installation
1. Attach front engine support
bolt into position and tighten to
5kg-m (35 ft-lbs).
2. Slide chassis to the rear to
align the rear mount and install
the mounting bolt. Tighten to 5
kg-m (35 ft-lbs).
3. Attach the rear shock
absorber and tighten to 4 kg-m
(28 ft-lbs).
4. Complete the remainder of
the assembly process in reverse
order of the disassembly.
5. When assembly is complete,
make sure to check the throttle
adjustment and brake
adjustment before attempting to
ride the scooter.
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
1a
UNDERSIDE OF SCOOTER
CHASIS
1b
ENGINE
SUPPORT BOLT
6-4
CHAPTER 6: ENGINE REMOVAL AND INSTALLATION