Dismantling The Rear Brake; Assembling The Rear Brake - Panterra Fusion Service Manual

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
13. The Rear Wheel, the Rear Brake & Rear Shock
Checking the Brake Lining
1. Measure the thickness of the
brake lining. Replace when it is
below 2.0mm (.079 in.).
Attention:
Don't have the oil adhere to
the lining surface.

Dismantling the Rear Brake

3. Remove the adjusting nut
of the rear brake.
4. Remove the brake lining.
5. Remove the fix bolt of
the brake arm.
6. Remove the brake arm.
7. Remove the brake cam.

Assembling the Rear Brake

8. Spread grease on the moving
parts of the lining and of the fix pin
(locating pin).
9. Spread grease on the moving
part of the brake cam shaft and
then assemble it.
10. Install the brake lining.
CHAPTER 13: THE REAR WHEEL,
THE REAR BRAKE & REAR BUFFER
FIX BOLT
6
5
BRAKE ARM
13-4
1
3
ADJUSTING NUT
9 10
143
BRAKE CAM LINING
BRAKE CAM
LINING
4