Checking The Starting Pivot; Installing The Starting Assembly - Panterra Fusion Service Manual

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
9. Driving Belt Device & The Starting Lever

Checking the Starting Pivot

1. Check if the pivot and the
gear are worn. Check if there is
any softness of the starting
return spring. Check if there is
any excessive wear on the pivot
sleeve.
2. Check if the driven gear is
worn or has failed. Check if the
friction spring is worn or
fractured.
3. Check if there is any
excessive wear on the bearing
part of the starting pivot and of
the shaft of the driven gear.
Replace any parts showing
excessive or unusual wear.
Installing the Starting
Assembly
1. Install the starting pivot
sleeve and the return spring to
the crankcase cover.
CHAPTER 9: DRIVING BELT DEVICE & THE STARTING LEVER
PIVOT SLEEVE
RUBBER SLEEVE
2
FRICTION SPRING
DRIVEN GEAR
9-4
1
RETURN
SPRING
BEARING PART OF THE
SHAFT OF THE DRIVEN GEAR
BEARING PART
OF STARTING
PIVOT
1
99
STARTING
PIVOT
3