50
4. Lubricating System
Assembling
1. Assemble inner and outer
rotators and oil pump
shaft.
Be careful of
alignment between
pump bearing unfilled
corner and inner
rotator unfilled corner.
2. Assemble pump cover
and tighten screws.
Installation
1. First put two o-rings at
the oil pump seat.
2. Put oil pump in the
crankshaft case.
First add oil to pump
and then assemble.
3. Tighten the three fixed
screws.
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
1
EXTERNAL ROTOR
INTERNAL ROTOR
1
4-6
PUMP SHAFT
2
OIL PUMP
O-RINGS
CHAPTER 4: LUBRICATING SYSTEM
3