Assembling The Clutch Housing - Panterra Fusion Service Manual

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
9. Driving Belt Device & The Starting Lever
4. Assembling the clutch/transmission
pulley, put the driving belt onto the
clutch/transmission pulley, then onto the
driving shaft.

Assembling the Clutch Housing

5. Use a spanner wrench to hold the
housing, then install the 10mm (.39 in.)
nut and tighten it.
Torque: 5.5kg/m 38ft lbs
Assemble the left crankcase cover.
CLUTCH
HOUSING
4
CHAPTER 9: DRIVING BELT DEVICE & THE STARTING LEVER
SPANNER
WRENCH
10mm
FIX NUT
DRIVING BELT
9-14
CLUTCH HOUSING
5
CLUTCH TRANSMISSION PULLEY
109