Panterra Fusion Service Manual page 160

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
14. The Battery and the Charging System
4. Connect the connecting
wire of the magnetor.
5. Clean the cone part of the
crankshaft and of the flywheel.
Be sure to lay the locating key
of the flywheel into the keyway
on the crankshaft precisely.
Point the groove of the flywheel
to the locating key on the
crankshaft and then assemble
it.
Attention:
Make sure that there
is no bolt/nut inside
the flywheel, and then
assemble it.
6. Use a universal solid wrench
to hold the flywheel, and then
lock the nut.
Torque: 3.8•m
7. Set up the cooling fan
Torque: 0.9kg•m
COOLING
FAN
7a
CHAPTER 14: THE BATTERY AND THE CHARGING SYSTEM
LOCATING KEY
7b
14-12
5
4a
157
MAGNETO
4b
CONNECTING PLUG
OFMAGNETO
SPANNER WRENCH
FLY WHEEL
6
UNIVERSAL
WRENCH