Checking The Brake Lining; Dismantling The Front Brake; Assembling The Front Brake - Panterra Fusion Service Manual

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
12. The Front Wheel, Front Brake,
Front Buffer and the Front Fork

Checking the Brake Lining

1. Measure the thickness of the
brake lining. Replace when it is
below 2.0mm (.079 in.)
Attention:
Don't have the oil adhere to
the lining surface.

Dismantling the Front Brake

3. Remove the adjusting nut
of the front brake.
4. Remove the brake lining.
5. Remove the fix bolt of
the brake arm.
6. Remove the brake arm.

Assembling the Front Brake

8. Spread grease on the moving
parts of the lining and of the fix pin
(locating pin).
9. Spread grease on the moving
part of the brake cam shaft and
then assemble it.
10. Install the brake lining.
CHAPTER 12: THE FRONT WHEEL, FRONT BRAKE,
FRONT BUFFER AND THE FRONT FORK
6
MIRCOMETER
BRAKE DRUM LINING
12-14
137
BRAKE DRUM
3