Panterra Fusion Service Manual page 116

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
10. The Final Transmission Assembly
4. Check if the bearing in the left
crankcase and the oil seal are worn
or damaged.
5. Check if the driving shaft (the
main clutch shaft) and the gear are
worn or damaged.
6. Check if the oil seal in the
bearing of the transmission gearbox
cover and that of the bearing of the
final gear shaft are worn or have
failed.
Attention:
Don't dismantle the final
transmission gearbox, except
that some parts have to be
replaced. While replacing
the driving shaft, the oil seal
must be replaced by new
ones.
Replacing Bearing (on the side
of the transmission gearbox
cover)
1. Use a bearing puller to remove
the bearing in the final transmission
gearbox.
2. Remove the oil seal on the final
transmission shaft.
3. Drive in the new bearing to the
final transmission cover.
CHAPTER 10: THE FINAL TRANSMISSION ASSEMBLY
FINAL TRANSMISSION
SHAFT BEARING
SUB SHAFT BEARING
OIL SEAL
DRIVING SHAFT BEARING
10-4
113