Panterra Fusion Service Manual page 62

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
5. Fuel System
Float Bowl
Disassembling
1. Disassemble three screws and
take off float bowl.
2. Remove float pin spring.
3. Remove high-speed jet, low-speed
jet and fuel volume control screw.
Be careful not to break the
fuel jets and control screw.
Count the turns when removing
the fuel volume control screw.
When reinstalling jets and
screws, do not over tighten.
4. Clean jets with solvent and
compressed air.
5. Clean body of carburetor by
blowing air through all passages.
CHAPTER 5: FUEL SYSTEM
FLOAT AREA
FLOAT BOWL
1
MAIN FUEL JET
FUEL PIN
SPRAY NOZZLE
FUEL VOLUME
REGULATION
SCREW
2
FLOAT PIN
5-8
FUEL PIN
59
3
LOW SPEED
JET