Panterra Fusion Service Manual page 34

31
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
2. Body Cover and Exhaust System
Right and Left Side Mold
1 2
Removal
1. Remove two rear body screws.
2. Remove three screws in either
side of mold.
3. Remove left and right side
panels.
Body under Cover Removal
5. Remove rear body panel.
NUTS
6. Remove left and right side
panels.
� 7
7. Remove two nuts in either side
of body under cover.
8. Remove body cover.
BODY UNDER COVER
Floor Panel Removal
1. Remove battery cover,
disconnect battery lead and
dismount battery.
2. Disconnect C.D.I. wire and take
it out of battery box.
5
3. Remove body cover.
4. Remove the speed-limiting
governor.
5. Remove four check bolts in the
floor panel.
6. Remove floor panel.
FLOOR COVER
2-4
CHAPTER 2: BODY COVER AND EXHAUST SYSTEM