The Rectifying Voltage Stabilizer - Panterra Fusion Service Manual

NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
14. The Battery and the Charging System

The rectifying voltage stabilizer

1. Checking the main cable circuit.
2. Detach the 4P plug from the
rectifying voltage stabilizer.
3. Check the conductivity between
terminals of the main cable in the
following way:
Item (matching color wire)
Checking the Rectifying
Voltage Regulator
1. After the main cable has been
tested and found normal, check the plug
of the rectifying voltage stabilizer
contact well and measure the resistance
among the terminals of the regulator.
Attention:
Make sure that your finger
doesn't touch the metal part
of the test bar of the multi-meter
because the human body has
resistance.
Use a multi-meter to test.
Test positions per chart.
2. When the resistance among the
terminals is abnormal, replace the
rectifying voltage stabilizer.
CHAPTER 14: THE BATTERY AND THE CHARGING SYSTEM
2
RED
YELLOW
GREEN
WHITE
Multimeter
White
Multi-
meter
White
Yellow
Red
Green
14-8
RECTIFYING
VOLTAGE
STABILIZER
Yellow Red Green
3K-50K
5K-100K
5K-100K
153