Installing The External I/O Expansion Unit In The Rack - Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual
External i/o expansion unit
Hide thumbs
Also See for SPARC Enterprise T5120:
- User manual (42 pages) ,
- Service manual (228 pages) ,
- Product notes (14 pages)
Table of Contents
Advertisement
6. Install the new top cover on the replacement External I/O Expansion Unit
chassis.
Note – The new top cover does not have system serial number label. The new
system serial number is located only on labels on the bezel (
left I/O boat bay of the FRU chassis.
Install 10 No. 1 Phillips screws on the top. Install 2 No. 1 Phillips screws on each
side.
7. Install the old top cover on the old chassis.
4.10.4
Installing the External I/O Expansion Unit in the
Rack
1. Use an antistatic strap for this procedure.
2. Use a No. 2 Phillips screwdriver to remove the left and right chassis lock
brackets from the sides of the old chassis (
4-28
External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
FIGURE 4-8
).
FIGURE 4-9
) and inside the
Advertisement
Table of Contents
