Types Of Ilom Messages For External I/O Expansion Unit - Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual

D.1 ILOM Messages
D.1.1 Types of ILOM Messages for External I/O
Expansion Unit
There are three categories of ILOM messages for the External I/O Expansion Unit, as
shown in
messages begin with the word Ext.
TABLE D-1
Category
Ext FRU
Ext info
Ext sensor
ILOM messages that do not begin with any of these terms describe conditions in the
server, and not in the External I/O Expansion Unit. To troubleshoot server problems,
refer to the technical documentation for your server.
D.1.2 Terms Used in ILOM Messages for External I/O
Expansion Unit
An ILOM message for the I/O Box includes one or more of the following terms to
help you locate a FRU.
TABLE D-2
Term
IOX@nnnn
IOBn
D-2 External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
. For the External I/O Expansion Unit, all ILOM diagnostic
TABLE D-1
Categories of ILOM Messages
For a List of Messages, See:
TABLE D-3
TABLE D-4
TABLE D-5
Locating a Faulty FRU
Definition
An External I/O Expansion Unit (I/O Box), where nnnn represents the last
four characters of the I/O Box centerplane serial number.
The last three characters of the centerplane serial number also match the
I/O Box system serial number.
A full address is typically /SYS/IOX@nnnn.
Boat number 0 or 1.
A full address is typically /SYS/IOX@nnnn/IOBn.
and the related troubleshooting sections