Installing Cables For Pci Cards - Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual

FIGURE 3-18
Figure Legend
1
2
15. Use the carrier locking screw located on the top of the handle to lock the carrier
handle in place.
16. Add the PCI card to an Oracle Solaris domain.
For details, refer to the service manual for your host server.
3.3

Installing Cables for PCI Cards

1. Use an antistatic strap for this procedure.
2. Route the cables across the top of the cable management unit as shown in
FIGURE 3-19
a. Route the cables along the right and left sides of the rack.
b. Place the ends of the cables on the top of the cable plate, then curve the
c. Use cable ties to hold the cables in place on the top of the cable management
Note – Before tightening the cable ties, ensure that each cable has a service loop
(freedom of movement) of at least 2 in./50 mm. This allows the cable plate and
cables to be moved from the normal position (
without the need to untie the cables.
3-16 External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
PCI Card and Carrier
Carrier handle (in closed position)
Carrier locking screw
or
FIGURE 3-20
cables down to the corresponding PCI cards.
unit.
.
FIGURE 4-4
) to the service position