Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual page 80

FIGURE 3-6
Figure Legend
1
2
11. Attach the PCI card to the carrier with one card lock:
a. Slide a card lock to the right edge of the PCI card.
b. Hold the card in place and partially tighten the card lock screw.
c. Verify that the PCI card is not tilted, then tighten the card lock screw.
3-6 External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
Placing the PCI Card on the Carrier
2
Card alignment tab
Card alignment post
Push the card lock against the card with sufficient pressure to slightly compress
the RFI gasket.
1