Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual page 8

A.4
A.5
A.6
B. External I/O Expansion Unit LED Status Indicators B-1
B.1
B.2
C. Using the ILOM CLI C-1
C.1
C.2
D. Troubleshooting with ILOM Diagnostic Messages D-1
D.1
D.2
D.3
D.4
D.5
D.6
viii External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
Power Source Requirements
Acoustic Noise Emissions A-4
Agency Compliance Specifications A-5
LED Locations B-2
LED States B-4
Using the CLI C-1
C.1.1 Starting the CLI C-2
C.1.2 Listing Valid Targets In a Namespace C-2
C.1.3 Listing Targets Below a Namespace C-2
C.1.4 Displaying Information About a Target or FRU C-2
C.1.5 Exiting the CLI C-3
Examples of CLI Commands for an I/O Box C-3
ILOM Messages D-2
D.1.1 Types of ILOM Messages for External I/O Expansion Unit D-2
D.1.2 Terms Used in ILOM Messages for External I/O Expansion Unit
D-2
Examples of Messages D-3
D.2.1 When Service Is Required D-3
D.2.2 When Service Is Not Required D-4
Clearing Ext FRU and Ext Sensor Messages D-4
Ext FRU Messages D-5
Ext info Messages D-6
Ext sensor Messages D-7
D.6.1 I2C_A Bus and I2C_B Bus D-10
A-4