Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual page 98

FIGURE 4-3
The left side of
The right side of the illustration shows the service position.
FIGURE 4-4
1
3
Figure Legend
1
2
3
5. After the carrier or I/O boat has been replaced, move the cable plate down into
its normal position and tighten the cable plate locking screws.
4-6 External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
Type B Cable Plate
FIGURE 4-4
Cable Plate (Side Views of Normal and Service Positions)
Cable plate in the normal position (lowered)
Cable plate in the service position (raised)
Cable plate locking screw (two places)
shows the cable plate in its normal position.
2