Starting The Cli; Listing Valid Targets In A Namespace; Listing Targets Below A Namespace; Displaying Information About A Target Or Fru - Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual

C.1.1

Starting the CLI

●
To start the ILOM CLI, type:
# spsh
C.1.2

Listing Valid Targets In a Namespace

●
To list all valid targets in the namespace, type:
-> help targets
The I/O Box and its FRUs are shown in the list of targets.
C.1.3

Listing Targets Below a Namespace

●
To list only targets that are below the current namespace, type:
-> show -display targets
C.1.4

Displaying Information About a Target or FRU

To display information about a target, first navigate to the target.
1. To navigate to a target, type:
-> cd target
2. At the target, display information about the target by typing:
-> show -display all
Options for -display include targets, properties, or all.
C-2 External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011