Exiting The Cli; Examples Of Cli Commands For An I/O Box - Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual

C.1.5

Exiting the CLI

●
To exit from the CLI, type:
-> exit
C.2 Examples of CLI Commands for an I/O
Box
This section shows how ILOM CLI commands can be used with an I/O Box.
To display information about an I/O Box, first navigate to the host server's /SYS
namespace:
-> cd /SYS
/SYS
Locate the I/O Box in the list of targets for the /SYS namespace:
-> show -display targets
/SYS
The display includes information about the host server, including LED names, data
registers, and devices in or connected to the host server. The I/O Box named
IOX@nnnn is one of the devices connected to the host server.
Targets:
SERVICE
LOCATE
ACT
PS_FAULT
TEMP_FAULT
FAN_FAULT
MB
HDD0
...
PS3
VPS
IOX@nnnn
Appendix C Using the ILOM CLI C-3