Installing The External I/O Expansion Unit In A Rack; Tools; Installing The Ac Cords - Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual

2
C H A P T E R
Installing the External I/O
Expansion Unit in a Rack
The following topics are in this chapter:
Section 2.1, "Tools" on page 2-1
■
Section 2.2, "Installing the Mounting Brackets in a Rack" on page 2-2
■
Section 2.3, "Installing the External I/O Expansion Unit in the Rack" on page 2-7
■
Section 2.4, "Installing the Cable Management Unit" on page 2-9
■
Section 2.5, "Installing the AC Cords" on page 2-13
■
Section 2.6, "Installing the Link Kit" on page 2-16
■
2.1

Tools

You need the following tools for this installation:
Phillips No. 1 screwdriver
■
Phillips No. 2 screwdriver
■
ESD-protected mat and a grounding strap
■
(Suggested) digital voltmeter to verify correct grounding
■
2-1