Installing The Mounting Brackets In A Rack - Sun Microsystems SPARC Enterprise T5120 Installation And Service Manual

2.2 Installing the Mounting Brackets in a
Rack
The External I/O Expansion Unit mounting kit (
mounting bracket and a left-side mounting bracket. The mounting brackets are
adjustable for length and are shipped unassembled. The mounting kit includes two
chassis lock brackets.
FIGURE 2-1
1
Figure Legend
1
2
3
4
1. Use an antistatic strap for this procedure.
2. Locate a suitable mounting location in the rack.
The External I/O Expansion Unit occupies a height of four rack units (6.9 in./175
■
mm).
Mount the heaviest subassemblies at the lowest available opening to minimize the
■
precarious effects of a top-heavy system.
2-2 External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
Mounting Kit
2
Left mounting bracket
Right mounting bracket
Left chassis lock bracket
Right chassis lock bracket
) includes a right-side
FIGURE 2-1
3
4