D.2.2
When Service Is Not Required
Messages that include the text string Ext info provide status information.
There will be no entry under the ILOM show faulty command or ILOM BUI Fault
Management tab for these messages. These messages are maintained in the ILOM
event log and can be displayed either through the ILOM CLI or the Event Logs tab in
the ILOM BUI.
Here is an example of an Ext info message displayed through the ILOM CLI:
-> show /SP/logs/event/list
ID
-----
5291
D.3
Clearing Ext FRU and Ext Sensor
Messages
Ext FRU and Ext Sensor faults are not automatically cleared from the ILOM fault
log. Use the set command to manually clear the fault message after the problem has
been repaired.
-> set clear_fault_action=true target
The example below shows how to clear an Ext FRU fault message for the link card in
an I/O boat:
-> set clear_fault_action=true /SYS/IOX@X0TC/IOB1/LINK
Are you sure you want to clear /SYS/IOX@X0TC/IOB1/LINK (y/n)? y
Set 'clear_fault_action' to 'true'
D-4
External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
Date/Time
------------------------
Thu Jul 31 20:42:40 2008
Ext info /SYS/IOX@X0X0/PS0 input power marginal
Class
Type
--------
--------
Chassis
minor
Severity
--------
minor