12. Remove the External I/O Expansion Unit chassis from the rack.
a. Use a No. 2 Phillips screwdriver to remove the four mounting screws from
b. Pull the chassis out of the rack and place it on an antistatic workbench.
4.10.3
Moving the Bezel to the New Chassis
1. Remove the bezel from the old chassis:
a. Use a No. 1 Phillips screwdriver to remove the top cover (
■
■
■
4-24
External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise T5xxx Servers • April 2011
the front of the chassis (
The empty chassis weighs 30 lb (13.6 kg).
There are 14 screws on the cover:
2 screws on the right side
2 screws on the left side
10 screws on the top
Note that the top cover of the old chassis can be identified by the presence of
service labels. The top cover of the new chassis does not have service labels.
).
FIGURE 2-6
).
FIGURE 4-6