Utility - Tadiran Telecom Emerald ICE Installation Manual

Modifying a System Group List
A system group list can be modified by adding a mailbox to the group list or
deleting a mailbox from the group list. If a mailbox number is already in the list,
entering that same number removes it from the list. If the mailbox number is not
already in the list, it will be added. A system group list can be modified by
renaming it or changing the recorded name.
To modify a system group list, follow the steps below:
1. From the System Administrator's Menu, dial
4
2. Dial to modify a system group list.
3. Dial the system group list number to be modified (30-79).
4. The system group list number and name are played.
1
5. Dial to add or delete a group list member - enter the mailbox
number(s) to be added or deleted. Press
2
6. Dial to rename the system group list - record the new name, then dial
# to end the recording.
7. When finished press
Menu or press

Utility

8.4
Setting the System Date and Time
The System Administrator's mailbox can also be used to set the system date and
time. The system date and time is used to generate the time and date stamp used
for all envelope information and check delivery notifications. It also is used to
generate accurate system traffic reports. It is important to insure that the system
date and time is accurate.
The time and date MUST be reset when there is a local time change such as
Daylight Savings Time.
To set the system date and time:
1. From the System Administrator's Main Menu, dial
*
one time to return to the System Administrator
*
two times to exit the system completely.
Emerald ICE HD Voicemail Installation Manual
4
for System Group Lists.
*
when finished.
5
.
8-13