Tadiran Telecom Emerald ICE Installation Manual page 146

13-12
Emerald ICE HD Voicemail Installation Manual
Name - The Last and First names of this subscriber.
Name Spell - This field, used to support ʹDial By Nameʹ is automatically
calculated and filled in by the program.
If you are using the Loopback Test Mailbox, information must be entered in
this screen.
Based on information defined by the Network Subscriber Data sheet all network
subscriber information is created or updated by performing the following steps:
From the Network Node Administration Screen, press
Mailbox Administration Screen. The Network Mailbox Administration Screen
appears.
a. In the Network Node Number field, enter the network node number for the
location of a Remote Subscriber.
b. Continue entering the rest of the Remote Subsriber's information into the
proper fields on the screen.
c. When finished entering data, press
screen will blank.
d. Continue entering any other Remote Subscribers as required, saving each
record.
d. After entering all Remote Subscribers, press
Node Administration screen.
E
e. Press again to return to the Main Menu.
E
f. Press again to return to the Main Status Screen.
Recording Greetings For Remote Subscribers
When sending messages to subscribers at remote network nodes, a verbal
confirmation of the subscriberʹs name is provided when the mailbox is selected.
These verbal confirmations are also provided to aid in destination mailbox
selection when using the ʹDial by Nameʹ feature. The System Administrator is
required to generate these verbal name confirmations for all subscribers at remote
network nodes. For further information on recording subscriber names refer to
Section 8- System Administrator Mailboxes
7
to get to the Network
5
then Y to save the record. The
E
to return to the Network
.