Tadiran Telecom Emerald ICE Installation Manual page 117

ADDITIONS: enter the mailbox number you are adding in the next available
grid box field. Press
Mailbox numbers can be entered in any sequence. To enter sequential mailbox
R
numbers, press
list.
While entering the mailboxes, watch the bottom of the screen for
confirmation of your entries. If the mailbox number is valid, you will see:
[ICE]: 0000xxx(xxx=mailbox number entered). If the number you enter does
not have a mailbox in the system, you will see: [0000xxx]: Cannot be found
(xxx=mailbox number entered) . Check the mailbox number and try again. If
it still does not verify, you can always create the mailbox when you are done
here and then add it to the group later. The system also eliminates any
duplicated numbers when the record is saved.
8. When finished, press
"Save Screen Information ? (Y/N)."
Undefined mailbox numbers are not saved. The system will prompt you as
follows: Error [ X Mailboxe(s) Could Not Be Found] Press
the message.
E
9. Press to return to the Main Status Screen.
Deleting a Personal Group List
To delete an entire Personal Group:
1. Enter system programming by pressing
and entering the system password (default=1234).
5
2. Press for Group List Management.
3. In the Group-No field, enter the group list number (must be between 11
and 29), and press
entries.
4. Verify that this is the group you wish to delete. If it is correct, press
5. The system will prompt you to verify the deletion: "Erase This Group ...?"
(Y/N)
6. Press Y to delete the group or N to cancel the operation.
E
7. Press to return to the Main Status Screen.
R
to move to the next mailbox field if desired.
. The system adds the next mailbox number to the
5
to save the group list. The system prompts:
1
R
. The screen will fill with the corresponding
Emerald ICE HD Voicemail Installation Manual
R
to clear
from the Main Status Screen
6
.
11-9