System Administrator Name - The individual responsible for managing a
node. This person is the point of contact for any networking problems related
to a node.
System Administrator Phone - Telephone number used to reach the System
Administrator in the event of problems related to a network node.
System Administrator Mailbox - Voice mailbox number where messages for
the System Administrator can be left to update network node administration
information, or notify the administrator of any problems that exist with the
network.
Loopback Test Mailbox - A test mailbox, located at each network node, where
messages can be sent to test network communications. All messages sent to
the loop test mailbox are immediately queued for return to the sender.
Box Length - The number of digits in a valid mailbox number for the network
node being defined.
Valid Box Range - The valid range of mailbox numbers for a network node.
Full Duplex - [This field is not used at this time.]
Priority User Delivery Schedule - Sets the delivery schedule for users with a
priority class of service. Delivery times and frequency of retries are defined for
both urgent and non-urgent messages sent by this type of user.
Normal User Delivery Schedule - Sets the delivery schedule for users with a
non-priority (i.e.; normal) class of service. Delivery times and frequency of
retries are defined for both urgent and non-urgent messages sent by this type
of user.
Accessing Programming Features
For your convenience, procedures for accessing the Emerald ICE HD Voicemail
system on-line (On-Line Programming Menu) and off-line (Main Menu)
programming features are given in the following subparagraphs.
Accessing the On-Line Programming Menu
The On-Line programming Menu allows the system to be programmed while it is
on-line and subscribers are sending and receiving messages.
a. From the Run Dialogue screen, press
programming Menu.
The screen prompts: ʺEnter Password .. [________]ʺ
This password is the same as the password used by the System
Administrator mailbox. The System Administrator has the option to
change the passowrd. The default password is 0000 (four zeros).
1
to access the On-Line
Emerald ICE HD Voicemail Installation Manual
13-5
Need help?
Do you have a question about the Emerald ICE and is the answer not in the manual?