3.3
Figure 3-2
Main Status
Screen-Password Entry
3-6
Emerald ICE HD Voicemail Installation Manual
Password Entry Screen
From the Main Status Menu press
the top of the Main Status Menu. Enter your password to access programming on
this screen. (The default password is 1234). The password matches the System
Administrator's mailbox password.
When the correct password is entered, the bottom portion of the Main Status
Menu screen displays a group of programming menu choices.
Press the number next to the category you wish to program. When finished press
0 to return to the Main Status Menu window or press 7 to shutdown Emerald
ICE HD Voicemail. For more information, refer to
System.
If Disk Clean Up is enabled on the Site Administration screen and Emerald
ICE HD Voicemail still has programming screens displayed, then
ICE HD Voicemail will not run the Disk Clean Up. The following error
message will appear at the bottom of the screen: "Press any key to exit and
run Clean Up." Emerald ICE HD Voicemail will then run the clean up routine.
Always remember to exit the programming screens.
1
and a password entry area will appear at
Section 2
: Shutting Down the
Emerald
Need help?
Do you have a question about the Emerald ICE and is the answer not in the manual?