Tadiran Telecom Emerald ICE Installation Manual page 78

7-6
Emerald ICE Voicemail Installation Manual
Non-Receipt Alert - One of the several delivery options available to mailbox
subscribers when sending a message is "non-receipt alert." When a message is
sent marked with this option, the value entered in this field specifies the
number of days the system waits for the destination mailbox to listen to the
message before placing a notification of non-receipt of the message in the
sending subscriber's mailbox. The range for this entry is 00 to 99.
End of Recording Alert - Whenever the mailbox is recording a message, the
system alerts the person making the recording when the end of the allowed
recording time is near. This alert is a short beep. The value programmed in
this field determines how long before the end of the recording time (set in
Max Message Length above) the system alerts the user. This value is entered
in seconds. The range of this entry is 00 to 99 seconds and cannot be longer
than the value set in Max Message Length above.
The Emerald ICE HD Voicemail system announces to a caller that there are
30 seconds left to record. Even though the value can be changed here, the
recorded prompt does not change from 30 seconds to the value entered in
this field.
Call Supervision - This option determines how a mailbox that is assigned this
COS handles a caller that needs to be transferred to a telephone. There are
four options available. The valid options are:
1. Blind/Unsupervised Transfer - Emerald ICE HD Voicemail initiates the
transfer to the telephone set and then releases the port for another call
2. Partial Supervision - Emerald ICE HD Voicemail initiates the transfer to
the telephone,but waits to hear the call progress return tones. If BUSY
tone is returned, the system immediately retrieves the caller and places
them in the mailbox to take a message. If RINGBACK tone is heard,
the voice mail system releases the caller to the telephone system and
releases the port for another call.
3. Complete / Full Supervision - Emerald ICE HD Voicemail initiates the
transfer to the telephone, and then waits for both ringback tone and
answer supervision signals before completing the transfer of the caller.
4. Call Screening - Emerald ICE HD Voicemail first asks the caller to record
their name and then initiates the transfer. When the subscriber answers
the call, he is played the recorded name and given the opportunity to
accept the call or refuse it, which then sends the outside caller to the
mailbox to leave a message.
For a mailbox user with this COS to be able to set these options by phone,
you must enter a 1 in the User Controlled Transfers field.