Testing The Network And Training Users - Tadiran Telecom Emerald ICE Installation Manual

Saving A Report
To save a report to floppy disk, press F. The screen prompts: ʺEnter file
Name)>[_________________].ʺ Place a floppy disk in the disk drive.
a. Enter a file name that is meaningful to you and indicates the contents of
the file. The file name must specify the floppy disk drive (A:) In addition,
the file name must consist of up to 8 characters (letters or numbers), a
period(.) and an extension that can be up to 3 characters (letters or
numbers). Example: ʺA:MBOX0195.RPTʺ for the January, 1995 mailbox
report.
The floppy disk must be an MS-DOS compatible, formatted, 3 1/2,
high-density or double-density diskette. You can use any standard DOS valid
file name. You can use any characters except spaces and the following
characters: *?,:[ ] +=\ / ; | < >. You cannot use a period except to separate the
file name from the extension.
b. After entering the file name, press
the floppy disk.
c. The screen then prompts: ʺ1 file(s) copied/moved. Hit any keyʺ.
d. Press any key. The message ʺProcess Doneʺ appears.
e. Press any key to return to the Network Transmission Report Screen.
E
f. Press
the Functions Menu.
E
g. Press

Testing The Network and Training Users

13.8
Test the Emerald ICE HD Voicemail network after the network nodes have been
established by creating a Loopback Test Mailbox for each node on the network.
Testing
a. Create a Loopback Test Mailbox for each Emerald ICE HD Voicemail system
on the network.
b. Call the Loopback Test Mailbox from another network node and leave a
message.
to exit the Network Transmission Report Screen and return to
to return to the On-Line Programming Menu.
Emerald ICE HD Voicemail Installation Manual
R
. The report will be saved to
13-17