Network Nodes And Parameters - Tadiran Telecom Emerald ICE Installation Manual

Optional Method
To force the system off-line immediately, press
Continue. All calls in progress will be immediately terminated (hung up),
regardless of their current status.
Placing the System On-Line
If the system has been taken off-line, place it back on-line to begin the voice
processing application: Type TAD and press the

Network Nodes and Parameters

13.4
It is not always necessary to fill out every field that appears on a screen.
Example procedures cover only those fields containing required data.
Several screens are used by the System Administrator to set up an Emerald ICE HD
Voicemail system for network communications. The process of configuring a
network node for network operation can be broken down into the following tasks:
• Defining new classes of service
• Setting up the local Emerald ICE HD Voicemail System
• Establishing network nodes
• Recording verbal prompts for remote network nodes.
Using the Networking data sheets as a reference guide, these tasks are performed
by following the steps outlined in the following subparagraphs.
Defining New Classes Of Service
New classes of service are set up using the Class of Service Screen and the Outdial
Parameters Screen. It is only necessary to perform this step if none of the existing
classes of service support the desired parameters for network access. If a new class
of service is needed to support the required level of networking function, create it
by performing the procedures described in
For illustration purposes, we will use COS 400 as the AMIS Class of Service.
New users that require AMIS capability will always receive COS 400. Users that
are being upgraded to AMIS capability will also be programmed to use COS 400.
0
- Immediate instead of
R
key.
Section 7- Class of Service Administration
Emerald ICE HD Voicemail Installation Manual
1
-
.
13-7