Table 3: Leaf Status Led; Table 4: Bad Port Led Configurations; Table 5: Connector Physical And Logical Link Indications - Mellanox Technologies MSX6536-10R Hardware Installation Manual

InfiniBand Switch Platform Hardware User Manual
The Leaf Status indicator LED
Table 3 - Leaf Status LED
LED Condition
Off
Solid Green
Flashing Green
Solid Orange
Solid Red
2.1.2.2 Bad Port LED
The Bad Port indicator is located on the left side of the leaf. The following Bad Port con-
ditions are possible:
Table 4 - Bad Port LED Configurations
LED Configuration
Off
Flashing Orange
This LED shows symbol errors. Possible causes for this are:
• bad cable
• bad connection
• bad connector
This LED lights up when one or more ports is receiving a symbol error. The LED imme-
diately goes off until the next symbol error is received.
2.1.2.3 UID LED Switch Identifier
The UID LED is a debug feature that will become available to customers in the near
future. For details please contact Mellanox Technologies support.
2.1.2.4 Leaf Board Port Connector LED Assignment
Above the ports are two LEDs one for the upper port
Each port has a single 2 color LED. Table 5 shows the link status according to the LED
condition.
Table 5 - Connector Physical and Logical Link Indications
LED Condition
Off
Solid Green
Mellanox Technologies
has the following LED assignment:
No power to the Leaf
Leaf is up and running
Leaf is powering up
Non fatal error – this leaf needs troubleshooting, but does not require
chassis shutdown
Fatal error
Description
OK – all ports are up and running.
Error – one or possibly more ports has just received a
symbol error
No power to the port
Logical link up
LED Description
and one for the lower port
LED Description
.
60