Mellanox Technologies MSX6536-10R Hardware Installation Manual page 12

InfiniBand FDR Switch Platform Hardware User Manual
4. Installation in Restricted Access Location
5. Risk of Electric Shock!
6. Over-temperature
7. Stacking the Chassis
8. Redundant Power Supply Connection - Electrical Hazard
9. Double Pole/Neutral Fusing
10. Multiple Power Inlets ,
Mellanox Technologies
This unit is intended for installation in a Restricted Access Location.
Risk of Electric Shock!
With the fan module removed power pins are accessible within the module cavity.
DO NOT insert tools or body parts into the fan module cavity.
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: 45°C (113°F). Moreover, to guarantee proper air
flow, allow at least 8cm (3 inches) of clearance around the ventilation openings.
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
This product includes a redundant power or a blank in its place. In case of a blank
power supply, do not operate the product with the blank cover removed or not securely
fastened.
This system has double pole/neutral fusing. Remove all power cords before opening
the cover of this product or touching any internal parts.
Risk of electric shock and energy hazard.
The PSUs are all independent.
Disconnect all power supplies to ensure a powered down state inside of the switch
platform.
Rev 1.7
12