Figure 7: Switch Status Led; Table 7: Switch Status Led Assignments - Mellanox Technologies SwitchX-2 MSX6005F-1BFS Hardware User Manual

Rev 1.0
2.2.2 Switch Status LED
Table 7 - Switch Status LED Assignments
LED Configuration
Solid Green
Flashing Green
Solid Yellow
Solid Red
Off
2.2.3 Fan Status LED
18 Mellanox Technologies

Figure 7: Switch Status LED

OK – The system is up and running.
The system is booting up. This assignment is valid on managed systems only.
To be implemented in a future SW release.
Major Error – Possible damage can result to the
e.g. bad firmware, can't boot, overheated. If the system is booting up, it can take
up to 5 minutes for the status led to change to green.
Off – The system has no power.
All fans must be operating while the power supply is plugged in.
switch
If the shuts down due to over temperature, unplug the
switch
and replug in the . For more information
PS1
PS2
UID
RST
STATUS/ System Health LED
switch
switch
See page 53
Basic Operation
. Turn off immediately.
, wait 5 minutes
.