InfiniBand FDR Switch Platform Hardware User Manual
18. For each offset and upper bracket, screw six bolts through the offset into the upper
bracket. See Figure 23. Use one flat washer and one lock washer for each of these
bolts. DO NOT TIGHTEN.
These holes are to screw
the bar into the shelf
19. Place the front lock-down bar at the edge of the chassis and align the holes in the
lock-down bar with the holes in the shelf. Screw down the lock-down bar. You will
need the 10 hex head screws and washers for each lock down bar. DO NOT
TIGHTEN
20. Screw down the second lock-down bar.
Mellanox Technologies
Figure 24: Location for the Lock-Down Bar
Figure 25: Lock-Down Bar
Figure 26: Lock-Down Bars Bolt and Washer Order
Bottom of
the chassis
These holes are
to screw the bar
into the Chassis
Rev 1.7
34