InfiniBand Switch Platform Hardware User Manual
Revision History
Table 1 - Revision History of this Installation Guide
Revision
1.5
Feb. 2014
1.4
Jan 2013
1.3
Jan 2012
1.2
Jan 2012
1.1
Nov 2011
1.0
July 2011
About this Manual
This manual provides installation and set-up instructions for the SX6536 QSFP Chassis
InfiniBand Switch Platform.
Intended Audience
This manual is intended for users and system administrators responsible for installing
and setting up the chassis platform.
The manual assumes familiarity with the InfiniBand
Mellanox Technologies
Date
Rearranged document: Consolidated installation sections under
"Installation," on page
re-ordered sections).
Added:
•
Figure 60, "Management Module LEDs," on page 65
Updated:
•
Section 1.4, "Power Supply Redundancy," on page 15
•
Section 1.7.3.5, "Installing the Shelf," on page 23
•
Section 1.7.4, "Installing the Cable Holder," on page 36
•
FDR note in
•
Section 1.10, "Hot Swap Insertion and Extraction," on page 40
•
Section 7.1, "Disassembling the Chassis," on page 84
•
Appendix A, "Installation Safety Warnings," on page 89
•
Added new figures
•
Added nut for ground post.
•
Added N+N information
•
Added bookmarks
•
Added Troubleshooting section
•
Updated Initial Configuration to include IPv6
•
New Address for Israel
•
New copyright
•
Added shock stickers
•
Aligned the UM with the IG procedures.
First release
Details
11; updated
Chapter 1, "Overview," on page
Section 1.9, "InfiniBand QSFP Cable Installation," on page 39
®
architecture specification.
Chapter 1,
12; and
8