Mellanox Technologies MSX6536-10R Hardware Installation Manual page 13

InfiniBand FDR Switch Platform Hardware User Manual
11. During Lightning - Electrical Hazard
12. Copper InfiniBand Cable Connecting/Disconnecting
13. Rack Mounting and Servicing
14. Equipment Installation
15. Equipment Disposal
16. Local and National Electrical Codes
17. Installation Codes
Mellanox Technologies
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
Copper InfiniBand cables are heavy and not flexible, as such they should be carefully
attached to or detached from the connectors. Refer to the cable manufacturer for spe-
cial warnings/instructions.
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with equip-
ment starting from the bottom to the top.
This equipment should be installed, replaced, and/or serviced only by trained and qual-
ified personnel.
Disposal of this equipment should be in accordance to all national laws and regula-
tions.
This equipment should be installed in compliance with local and national electrical
codes.
This device must be installed according to the latest version of the country
national electrical codes. For North America, equipment must be installed in
accordance to the applicable requirements in the US National Electrical Code
and the Canadian Electrical Code.
Rev 1.7
13